The 17B66 frees you up to use this component with a variety of patients and multiple configurations.
Home
Orthotists & ProsthetistsOur ProductsCustom Orthotics | Bracing & SupportsCustom OrthoticsAnkle-Foot Orthoses17B66 Ankle Joint
Orthotists & ProsthetistsOur ProductsCustom Orthotics | Bracing & SupportsCustom OrthoticsAnkle-Foot Orthoses17B66 Ankle Joint
17B66 Double Action Ankle Joint
At a Glance
- Available with 16 mm and 20 mm connection widths
- Delivery includes springs, stops and spring stops
- Universal design for the left and right side
- Delivered in sets of 2
- Corrosion-resistant CrMo stainless steel
Versatile and Dependable
The new 17B66 provides you with an ankle joint that has nine different variations and can be continuously adjusted and combined, allowing for optimal adjustment to the patient at any time. The time-consuming tasks of exchanging, improvising or grinding in order to achieve the desired function is behind you!
Higher Range of Motion
The average radius of motion of a healthy person’s ankle joint in everyday life is about 40°. The System Joint’s construction allows for a range of motion of 50°! Within the 50° angle, the joint’s range of motion allows for continuous adjustment by means of springs, stops or spring stops. Plus there’s no need to alter the head of the foot stirrup!Nine variations
By combining springs, stops and spring stops in the dorsal or plantar joint channel, nine functional variations can be implemented. Thanks to these combination possibilities, the 17B66 Ankle Joint can be continuously adapted at any time to comply with patient requirements.
Foot Stirrups
Four foot stirrups are available for the fabrication of different types of orthoses.
- 17B113 Short foot stirrup for thermoplastic technique
- 17B114 Forked foot stirrup for lamination resin technique
- 17B115 Shoe stirrup for 17F35=L/R 150
- 17B116=* Double shoe stirrup available from 180 to 300 mm in increments of 20 mm
Technical data
The 17B66 is delivered complete with springs, stops and spring stops and is available in two different system bar widths. In the 16 mm and 20 mm variants, only the connection widths differ from each other. All other dimensions are identical.
Specification Sheet and Adjustment Options
| Article no. | System width | Clevis width | Connection plug |
| 17B66=16 | 16 mm | 3 mm | interior |
| 17B66=20 | 20 mm | 3 mm | interior |
| 17B66=A-16 | 16 mm | 3 mm | exterior |
| 17B66=A-20 | 20 mm | 3 mm | exterior |
Copyright by Ottobock © 2012
